Sensor Adjust Knob
8.If the ribbon is already loaded or you just want to print with direct thermal mode, raise back the Head Latch Support Bracket and close the print head module by pushing downward on the Head Latch.
B.LOADING THE RIBBON
1.Open the Side Access Door by lifting it up and to the left.
2.Open the print head module by pushing the Head Latch toward the rear of the printer. The print head module is
3.Locate the Extra Ribbon Core supplied with the printer. Place the core on the Ribbon Rewind Spindle, pushing it all the way to the inside of the spindle.
Ribbon Rewind Spindle Ribbon Supply Roll
Empty Core
Head Latch