Command Language Quick Reference 29
(Table continued from previous page)
Command Description
Rxxxx Set vertical offset
r<n..n> Retrieve label data from printer buffer.
<n..n> : label name
sm<n..n> Save label data to printer buffer.
m : memory module, <n..n> : label name
Txx Set end-of-line code, xx : hex value
z Change slash zero to normal zero (0).
+xx Make auto increment for numeric or
>xx alphanumeric,
xx : count
-xx Make auto decrement for numeric or
<xx alphanumeric,
xx: count
^xx Set count amount, xx : count
Notes:
1. The formatting and editing commands should be groupedtogether, leaded by <STX>L and ended by E command**: The parameter ranges from A to E (1 ~ 4 ips)Editing CommandsCommands Description
rthveeeyyyyxxxx<string><CR> general format
r: print direction 1,2,3 or 4 (rotation)
t: object type 0 ~ 9 and : (fonts) **,
A ~ Z and a ~ z (bar codes),
X (lines or boxes),
Y (graphics).
h: width multiplier 1 ~ 9 and A ~ O.
0 stands for default.
v: height multiplier 1 ~ 9 and A ~ O,
0 stands for default.
eee: bar code height This is ignored for box, line and
graphics. It represents point size for
font 9 and symbol set for Courier
font**.
yyyy: Y coordinate
xxxx: X coordinate
<string>: depends on
object types
510172_r1.qxd 3/21/2001 6:25 PM Page 29