21.Insert a Pad Tube (17) into the Leg Developer
(6).Next, slide two Leg Pads (23) onto the Pad Tube. Then, slide two Pad Covers (30) onto the Leg Pads, and press a 19mm Large Round Cap
(118)into each Pad Cover.
Repeat this step for the Seat Frame (4).
22.Attach the Curl Pad (20) to the Curl Post (9) with two M6 x 30mm Screws (87).
23.Make sure that all parts are properly tightened before using the weight system. The use of the remaining parts will be explained in the ADJUST- MENTS section, beginning on the following page.
21 |
|
118 |
|
30 | 4 |
| |
| 23 |
| 17 |
| 6 |
| 23 |
| 30 |
| 118 |
22 |
|
20 |
|
| 9 |
| 87 |
12
