PYLE Audio HD-V9000 06Initial Settings

06Initial Settings

 Video output settings (Video Output)

Setting item	Settings	Description
	720 x 480i
	(default for USA	720 x 480 pixel interlaced signals are output from the video output terminals.
	and Canadian
	models)
	720 x 480p	720 x 480 pixel progressive signals are output from the video output terminals.
Scaler Setting1	720 x 576i
	(default for	720 x 576 pixel interlaced signals are output from the video output terminals.
	European model)
	720 x 576p	720 x 576 pixel progressive signals are output from the video output terminals.
	1280 x 720p	1280 x 720 pixel progressive signals are output from the video output terminals.
	1920 x 1080i	1920 x 1080 pixel interlaced signals are output from the video output terminals.
	1920 x 1080p	1920 x 1080 pixel progressive signals are output from the video output terminals.
	Off	Video signals with the resolution set at Scaler Setting are output from the HDMI OUT
		terminal.
EDID
	On	Video signals with a resolution appropriate for the connected display are selected
		automatically and output from the HDMI OUT terminal.2
TV Screen	4:3	The aspect ratio is set to the conventional size (4:3).
	16:9	The aspect ratio is set to wide size (16:9).
Still Picture3	Field	Shaking when playing still pictures is eliminated, and the picture quality is clearer.
	Frame	This is the normal mode.
		Video signals are always output, even when not in the play mode and when no menu screen
Sync Out	Off	is displayed and there is no video signal (synchronizing signals are always output). The blue
		or black background color is displayed in the pause and stop modes.
(During SQ)
	On	No video signal is output when not in the play mode and when no menu screen is displayed
		(no synchronizing signals are output).
	Off	The output signal is not synchronized with the external synchronizing signal input from the
		EXT SYNC IN terminal.
External Sync3
		The output signal is synchronized with the external synchronizing signal input from the EXT
	On	SYNC IN terminal. For the external synchronizing signal, input NTSC/PAL Black-Burst
		signals or HD tri-level synchronizing signals (page 48).4

1.• When EDID is set to Off or when the display is not connected by HDMI cable, an “*” is displayed for the current setting (ex.: 1280 x 720p*).

• When EDID is set to On or when the display is connected by HDMI cable, an “*” is displayed for recommended resolution

(ex.: 1280 x 720p*).

2.• The EDID function automatically changes the Scaler Setting settings. The Scaler Setting settings can be changed manually, but they are automatically set with the EDID function when the power is turned back on.

•Video signals with the same resolution are output from the COMPONENT VIDEO OUT and HDMI OUT terminals.

•The EDID function may not work properly unless the display’s power is turned on before turning on this unit’s power.

3.Only settable in the stop mode. For some files, the picture will not become sharper even when Still Picture is set to Field.

4.1920 x 1080p synchronizing signals are not supported.

Display settings

Setting item	Settings	Description
On Screen Display	Off	Playback information (page 36) is not displayed on the display.
	On	Playback information (page 36) is displayed on the display.
	Off	The monitor’s on-screen display is not superimposed on the VIDEO OUT terminal’s picture.
	Top	The monitor’s on-screen display is superimposed over the top half of the VIDEO OUT
Monitor OSD		terminal’s picture.
	Bottom	The monitor’s on-screen display is superimposed over the bottom half of the VIDEO OUT
		terminal’s picture.
Background5	Black	Sets the background color in the pause and stop modes to black.
	Blue	Sets the background color in the pause and stop modes to blue.

5. Only settable in the stop mode.

46

En