Q-Logic 2300 manual QLA2342/2342L, Troubleshooting, Section

SANblade 2300 Series User’s Guide		￿
2-Gb Fibre Channel to PCI-X Host Bus Adapters
2.7	Agency Certification	2-20
2.7.1	EMI and EMC Requirements	2-20
2.7.2	Product Safety Requirements	2-21
Section 3	QLA2342/2342L
3.1	QLA2342/2342L HBA Components	3-1
3.1.1	LEDs	3-2
3.1.2	Jumpers	3-2
3.2	Installation in the Computer	3-2
3.2.1	Installation Help	3-4
3.3	Fast!UTIL	3-5
3.3.1	Introduction	3-5
3.3.2	Configuration Settings	3-5
3.3.2.1	Host Adapter Settings	3-6
3.3.2.2	Selectable Boot Settings	3-6
3.3.2.3	Restore Default Settings	3-7
3.3.2.4	Raw NVRAM Data	3-7
3.3.2.5	Advanced Adapter Settings	3-7
3.3.2.6	Extended Firmware Settings	3-9
3.3.3	Scan Fibre Channel Devices	3-11
3.3.4	Fibre Disk Utility	3-11
3.3.5	Select Host Adapter	3-11
3.4	FCode	3-12
3.4.1	Flashing a QLA2342/2342L HBA with FCode	3-12
3.4.2	Setting the QLA2342/2342L HBA Connection Mode . . .	3-13
3.4.3	Setting the QLA2342/2342L HBA Loop ID	3-14
3.4.4	Setting and Viewing the Fibre Channel Data Rate	3-14
3.4.5	Selecting the Boot Device	3-15
3.4.6	Building the Bootable Disk	3-16
3.5	Specifications	3-19
3.6	Label	3-20
3.7	Agency Certification	3-20
3.7.1	EMI and EMC Requirements	3-20
3.7.2	Product Safety Requirements	3-21
Section 4	Troubleshooting
4.1	Problems After Installation	4-1
4.2	Hardware Problem Checklist	4-1
4.3	System Configuration Problem Checklist	4-1
4.4	Fibre Channel Problem Checklist	4-2

Page iv FC2354601-00 A