Section 8
NetWare Driver Installation
(QL2300.HAM)
8.1
Introduction
This section provides instructions for installing the NetWare driver in an already installed Novell NetWare 4.2, 5.x, or 6.x system.
NOTE: References to Novell NetWare 5.x and 6.x refer to versions that are currently supported by Novell.
8.2
NetWare Driver Files and Parameters
The latest versions of the software drivers and documentation for NetWare 4.2, 5.x, and 6.x are available on the QLogic Web site. Be sure to review the README.TXT file for both new and changed information.
You can load the QL2300.HAM driver with optional switches to modify driver functionality. The switches are described in table
| Table |
|
|
Parameter | Description |
|
|
SLOT = n | This switch specifies the PCI slot (slot n) in which the QLA23xx HBA |
| is installed. The driver must be loaded once for each QLA23xx HBA |
| in your system. For example: |
| LOAD QL2300.HAM SLOT=3 |
/LUNS | This switch specifies that all logical unit number (LUN) devices are |
| scanned after the driver loads. Otherwise, NetWare only scans for |
| LUN 0 devices. This switch is required for |
| subsystems, for example, RAID subsystems. For example: |
| LOAD QL2300.HAM SLOT=3 /LUNS |
|
|
|
