Q-Logic 2300 manual Windows XP Driver Installation, NetWare Driver Installation, Section

SANblade 2300 Series User’s Guide		￿
2-Gb Fibre Channel to PCI-X Host Bus Adapters
6.5.3	QL2x00IP NDIS Driver Configuration	6-7
6.5.4	Removing the QL2x00IP NDIS Driver	6-9
Section 7	Windows XP Driver Installation
7.1	Introduction	7-1
7.2	Creating the Driver Disk	7-1
7.3	Installing the Windows XP Driver	7-1

7.3.1Installing Windows XP with the QLA23xx HBA

as the Boot Device 7-2

7.3.2Installing Windows XP with the QLA23xx HBA

	as an Add-On	7-2
7.3.3	Installing the QL2300.SYS Driver	7-3
7.3.4	Updating the Existing QLA2300.SYS Driver	7-4
7.4	Removing the Driver	7-5
7.5	System Registry Parameters	7-5
7.5.1	MaximumSGList	7-5
7.5.2	NumberOfRequests	7-6
7.5.3	FCTape	7-6
7.5.4	UseSameNN	7-7

Section 8	NetWare Driver Installation
8.1	Introduction	8-1
8.2	NetWare Driver Files and Parameters	8-1
8.3	Installing the NetWare Driver	8-2

Section 9	Red Hat Linux Driver Installation
9.1	Introduction	9-1
9.2	Creating the Driver Floppy Disk	9-1

9.2.1Driver Floppy Disk 1 (New Operating System

	Installation)	9-1
9.2.2	Driver Floppy Disk 2 (Installed Operating System)	9-2
9.2.3	Source Code Driver Floppy Disk	9-2

9.3Install a New Operating System and Driver

(Red Hat Linux 6.2) 9-3

9.4Install or Update the Driver (Installed Operating

	System)	9-3
9.4.1	Installing the Driver on the Boot Drive	9-4
9.4.2	Loading the Driver	9-5

9.4.2.1Building a Custom Kernel to Load the

qla2x00 (v4.x) Driver Automatically 9-5

9.4.2.2Building a Ramdisk Image to Load the Driver

Automatically 9-9

Page vi FC2354601-00 A