Q-See QSDT8PCRC manual User Manual, Auto Mail Function, Motion Recording

Error! Use the Home tab to apply

1 to the text that you want to

appear here. Error! Use the Home
tab to apply		1 to the text that
you want to appear here.			SuperDVR & QSDT8PCRC
标题	HDD space shortage alarm.
	1.	Video Loss
	Users can select alarm output for this option. For example, users select
	alarm out1 and alarm_out3 for video loss. Then video loss of any channel will
	trigger alarm_out1, alarm_out3 to show a red light in the Alarm output status
	panel (refer to Figure4-6 for reference to this panel).
	2.	Disk Alarm
		标题	User Manual
	trigger alarm.

When HDD available space is less than the set value (see Figure5-9), it will

3.Sensor

Sensor 1: If users have mounted sensors, when the sensors have been activated, it will trigger the selected output alarms.

Sensor 2 - Sensor 16: Two QSPD4116 cards have a maximum of 16 sensors.

4.Motion

Motion 1: Users can set the output of motion detection alarm by different alarms and remote alarm.

Motion 2 - Motion 16: 32CH card has maximum 16 motion alarms.

NOTICE: You should choose our additional alarm device board while using two QSPD4116 cards for alarm I/O.

5.5.4 Auto Mail Function

Users can select the above-mentioned alarms to be output by Auto Mail.

NOTICE: Before you setup this function, make sure the DVR is set to

Motion Recording.

Click ‘Auto Mail’ icon on the left top side of alarm configuration page to enter the following area to make Auto Mail setup, refer to Figure5-12.

30