Q-See manual Motion Detection Alarm Configuration, SuperDVR & QSDT8PCRC

Error! Use the Home tab to apply
1 to the text that you want to
appear here. Error! Use the Home
tab to apply	1 to the text that
you want to appear here.			SuperDVR & QSDT8PCRC
标题	标题	Figure5-8	Edit Schedule	User Manual
5.5 Motion Detection Alarm Configuration

5.5.1 Alarm Triggering Conditions Configuration

The system can receive alarms from both local place and network.

Local Alarm Record Triggering Configuration

Figure5-9 Local Alarm Triggering Configuration

Explanation of options:

1.Buzzer

Users can select whether to trigger the computer buzzer if alarms have been triggered and also select how long the buzzer sounds.

2.Pre-Alarm Record

Users can select whether to enable alarm pre-record and also pre-record time.

3.Big Screen Holding Time

The corresponding channel will be full screen when an alarm is triggered. Set the full screen hold time here.

4.Motion Holding Time

How long the recording continues after motion stops.

5.Sensor Holding Time

How long the recording continues after sensor stops.

6.Disk Shortage Alarm

If the Partition free space is less than the set percent, it will stop recording or recycling, but give alarm tips according to the settings.

28