Assembling and Installing Storm Collar
CAUTION
Sharp Edges
•Wear protective gloves and safety glasses during installation.
Connect both halves of the storm collar with two screws (see Figure 8.17).
Wrap the storm collar around the exposed pipe section and align brackets. Insert a bolt (provided) through the brackets and tighten nut to complete storm collar assem- bly (see Figure 8.18).
Slide the assembled storm collar down the pipe section until it rests on the roof flashing.
Caulk around the top of the storm collar (see Figure 8.15).
Figure 8.18 Assembling the Storm Collar Around the Pipe
Figure 8.17 Assembling the Storm Collar
28 |
