RAD Data comm IPmux-1E specs

Figure 1

DC Power Supply Connection – Terminal Block Connector

Note: Ignore this supplement if the unit is AC-powered.

DC-powered units are equipped with a plastic 3-pin VDC-INpower input connector, located on the unit rear panel. Supplied with such a unit, is a mating Terminal Block (TB) type connector plug for attaching to your power supply cable.

Connect the wires of your power supply cable to the TB plug, according to the voltage polarity and assembly instructions provided below.

Caution: Prepare the connections to the TB plug before inserting it into the VDC-INconnector.

Preparing and Connecting the TB Plug

Refer to Figure 1 for assistance.

1.Strip the insulation of your power supply cable wires according to the dimensions shown.

2.Place each wire lead into the appropriate TB plug terminal according to the voltage polarity mapping shown in Figure 2.

(If the terminal is not already open, loosen its terminal screw.)

3.Tighten the three terminal screws.

4.Pull a nylon cable tie (supplied) around the power supply cable to secure it firmly to the TB plug grip (pass the tie through the holes on the grip).

DC Power Input
Connector				20 mm
(on unit panel)				5 m m
				5 m m

Terminal screws

See Figure 2 for m apping

Mating

TB Connector

Plug

TB plug grip

W ire stripping

dimensions

Nylon cable tie

DC pow er

cable

5.Isolate the exposed terminal screws / wire

leads using a plastic sleeve or insulating tape, to prevent the possibility of short-circuit.

6.Connect the assembled power supply cable to the unit by inserting the TB plug into the unit’s VDC-INconnector, until it snaps into place.

DC Power Supply Wire Voltage Polarity

Refer to Figure 2 for proper mapping of the power supply wire leads to the TB plug’s three terminals.

Warning:

Reversing the wire voltage polarity can cause serious damage to the unit!

For -24 or -48 VDC input:

For +24 or +48 VDC input:

-48 (or -24)

G round

C hassis

VD C input

C hassis

G round

(0)

(fram e)

(negative pole)

(positive pole)

(fram e)

(0)

G round

Figure 2

SUP-220-04/00

Order from: Cutter Networks

Ph:727-398-5252/Fax:727-397-9610

www.bestdatasource.com

IPmux-1E, IPmux-1 specifications

RAD Data Comm is a renowned manufacturer known for its high-quality communication solutions, and among its notable offerings are the IPmux-1 and IPmux-1E devices. These compact and versatile products are designed for efficient network integration and data transport over various mediums including IP-based networks.

The IPmux-1 is a powerful multiplexer that enables the transmission of multiple channels of voice, data, and even fax over a single IP link. It supports various protocols such as E1, T1, and V.35, making it an ideal solution for businesses looking to optimize their existing infrastructure while upgrading to more modern technologies. The device is also equipped with advanced features such as payload compression and error correction, which ensure high-quality performance even over less reliable networks.

On the other hand, the IPmux-1E is an enhanced version of the original device, featuring additional capabilities that extend its flexibility and functionality. This model supports a higher density of channels and offers advanced management and monitoring tools that provide users with detailed insights into network performance. The IPmux-1E is particularly beneficial for service providers and enterprises that require a more robust solution capable of handling greater bandwidth and multiple service types across a single platform.

Both IPmux models utilize advanced packet-processing technology, facilitating seamless data encapsulation and reducing latency, which is critical in today’s fast-paced digital environment. They are designed to easily integrate with existing infrastructure, allowing organizations to transition smoothly to a more modern telecommunications framework without the need for significant investment in new hardware.

Key characteristics of the IPmux-1 and IPmux-1E include their reliability, low power consumption, and rugged design suitable for deployment in various locations. Their modular architecture offers users the flexibility to scale their systems according to evolving needs.

In summary, RAD Data Comm's IPmux-1 and IPmux-1E devices provide an excellent solution for organizations seeking to consolidate their voice and data services into a single network infrastructure. With their advanced features, support for various protocols, and robust performance, they are well-suited for both enterprise and service provider applications, ensuring efficient communication and data management in today's increasingly connected world.

RAD Data comm IPmux-1E operation manual DC Power Supply Connection Terminal Block Connector

Models: IPmux-1E IPmux-1

DC Power Supply Connection – Terminal Block Connector

Preparing and Connecting the TB Plug

DC Power Supply Wire Voltage Polarity

For -24 or -48 VDC input:

IPmux-1E, IPmux-1 specifications