RAD Data comm IPmux-1E Configuring IPmux-1 Station a, Procedure for Modifying Parameters

IPmux-1/1EInstallation and Operation Manual Chapter 5 Application Configuration Procedures

Configuring IPmux-1 – Station A

Procedure for Modifying Parameters

➤To modify parameters:

1.Choose the number of the parameter to be changed.

2.Press the <Spacebar> to toggle through the possible values.

3.Select the desired value by pressing <Enter>.

4.When you have finished modifying all the parameters on a menu, press <S> to save the configuration.

5.To return to a previous menu, press <Esc>.

Host IP Address

		Note	Frames will not leave the device until IP and Mask addresses are defined.
Main Menu		➤	To configure the Host IP Address:
	↓		1.	From the Main menu, select 2 Configuration.
2.	Configuration
	↓		2.	From the Configuration menu select 1 General Configuration.
1.	General		3.	From the General Configuration menu, press 1 Host IP (see Figure 5-2).
Configuration

↓4. Enter the Host IP Address and Mask.

1.Host IP

5. Press <Esc> a few times back to the General Configuration menu.

		Note	Remember to press <Enter> after modifying each parameter. Press <S> to save
			all changes on the menu.
			HOST IP
1.		IP Address	192.168.100.11
2.		IP Mask	255.255.255.0
	ESC. Exit		S.Save

Select item from the menu.

Figure 5-2. Host IP Menu

IPmux-1 5-5

Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com