IPmux-1/1EInstallation and Operation Manual

Chapter 2 Installation

 

 

IPmux-1E

The IPmux-1E FXS version needs NO user internal jumper configuration.

The IPmux-1E ISDN version contains jumpers for phantom feed (see Figure 2-1). Open the case and check the positions of internal jumpers before the IPmux-1E installation.

➤To open the IPmux-1E case:

1.Disconnect all the cables connected to the IPmux-1E.

2.Release the cover screws at the rear panel (one is near the POWER connector).

3.Slide the IPmux-1E top cover by pulling it straight out.

➤To set the IPmux-1E ISDN-S module jumpers:

If necessary, change the settings in accordance with the specific requirements of your application:

• ENA – enable phantom feed

• DIS – disable phantom feed

The phantom feed ENA/DIS setting influences the IPmux-1E BRI operation mode. When phantom feed is disabled, the S interface can be configured (through software) to the TE or NT mode. When phantom feed is enabled, only the NT mode is possible.

Warning

Caution

Only qualified and authorized service personnel should have access to the inside of the unit.

Disconnect the unit from the power line and from all the cables before removing the cover.

Line voltages are present inside IPmux-1E when it is connected to power. Moreover, under certain external fault conditions, dangerous voltages may appear on the lines connected to IPmux-1E.

Any adjustment, maintenance, and repair of the opened device under voltage should be avoided as much as possible and, when inevitable, should be carried out only by a skilled technician who is aware of the hazards involved. Capacitors inside the device may still be charged even after it has been disconnected from its source of power.

The IPmux-1E contains components sensitive to electrostatic discharge (ESD). To prevent ESD damage, avoid touching the internal components, and before moving jumpers, touch the IPmux-1E rear panel.

Installation and Setup

2-3

Order from: Cutter Networks

Ph:727-398-5252/Fax:727-397-9610

www.bestdatasource.com

Page 38 Page 40
Page 39
Image 39
RAD Data comm operation manual To open the IPmux-1E case, To set the IPmux-1E ISDN-S module jumpers
Page 38 Page 40

IPmux-1E, IPmux-1 specifications

RAD Data Comm is a renowned manufacturer known for its high-quality communication solutions, and among its notable offerings are the IPmux-1 and IPmux-1E devices. These compact and versatile products are designed for efficient network integration and data transport over various mediums including IP-based networks.

The IPmux-1 is a powerful multiplexer that enables the transmission of multiple channels of voice, data, and even fax over a single IP link. It supports various protocols such as E1, T1, and V.35, making it an ideal solution for businesses looking to optimize their existing infrastructure while upgrading to more modern technologies. The device is also equipped with advanced features such as payload compression and error correction, which ensure high-quality performance even over less reliable networks.

On the other hand, the IPmux-1E is an enhanced version of the original device, featuring additional capabilities that extend its flexibility and functionality. This model supports a higher density of channels and offers advanced management and monitoring tools that provide users with detailed insights into network performance. The IPmux-1E is particularly beneficial for service providers and enterprises that require a more robust solution capable of handling greater bandwidth and multiple service types across a single platform.

Both IPmux models utilize advanced packet-processing technology, facilitating seamless data encapsulation and reducing latency, which is critical in today’s fast-paced digital environment. They are designed to easily integrate with existing infrastructure, allowing organizations to transition smoothly to a more modern telecommunications framework without the need for significant investment in new hardware.

Key characteristics of the IPmux-1 and IPmux-1E include their reliability, low power consumption, and rugged design suitable for deployment in various locations. Their modular architecture offers users the flexibility to scale their systems according to evolving needs.

In summary, RAD Data Comm's IPmux-1 and IPmux-1E devices provide an excellent solution for organizations seeking to consolidate their voice and data services into a single network infrastructure. With their advanced features, support for various protocols, and robust performance, they are well-suited for both enterprise and service provider applications, ensuring efficient communication and data management in today's increasingly connected world.
Top Page Image Contents