RAD Data comm IPmux-1E operation manual Manager List, To configure the Manager in IPmux-1/4

IPmux-1/1EInstallation and Operation ManualChapter 5 Application Configuration Procedures

Remember to press <Enter> after modifying each parameter. Press <S> to save Note all changes on the menu.

	AUTHENTICATION/COMMUNITY MENU
1.	Authentication Failure Trap	On
2.	Trap	Public
3.	Read	Public
4.	Write	Public

ESC> Exit

Select item from the menu:

	Figure 5-8. Authentication/Community Menu
Note	Verify that your Read and Write communities on the NMS match the ones on
	IPmux-1/4.

Main Menu

↓

2. Configuration

↓

1.General Configuration

↓

3.Management Configuration

↓

2. Manager List

Manager List

➤To configure the Manager in IPmux-1/4:

1.From the Management Configuration menu, press 2 Manager List (see Figure 5-9).

2.Enter the Manager IP Address (the Manager IP Address in Figure 5-9is used as an example. Choose the Manager IP Address of your application).

3.Select Status Change Trap according to your application requirements (for details refer to Manager List in the IPmux-4 manual.

4.Select Alarm Trap according to your application requirements (for details refer to Manager List in the IPmux-4 manual.

5.Select System Trap according to your application requirements (for details refer to Manager List in the IPmux-4 manual.

6.Press <S> to save the configuration.

7.Press <Esc> a few times to return to the Main menu.

Note	Remember to press <Enter> after modifying each parameter. Press <S> to save
	all changes on the menu.

Configuring the Management Option 5-15

Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com