INSTALLATION
8.Screw the video capture card firmly into place using the screw you removed in step 6.
9.Replace the computer’s cover. Fasten it with the screws you removed in step 3.
10.Plug the computer’s power cord back into the computer and reattach your peripherals to the computer.
Connecting Your NTSC Camera
to Your Video Capture Card
You can use the NTSC video camera included in your Bigpicture package, a camcorder (not included), or a VCR (not included) to channel video signals into your capture card. If you wish to use a camcorder or VCR, go to “Connecting a Camcorder or
Other NTSC Device to the Video Capture Card” on page 10.
Make the following connections to hook up your Bigpicture NTSC camera while referring to the diagram below.
8
