Telephone Operation
±"016'"±"
If an area code is already stored, it appears on the display. To delete the area code, press TRSF/DEL three times, then enter your area code. Or you can use ∗6/TONE or #7 to move the cursor and edit the area code
1.Lift the handset and hold down CID/MENU until the menu appears.
2.Press 3 or 9 twice to selectý7h[Wý9eZ[.
3.Press CH/SEL, then enter your
code. If you make a mistake, repeatedly press ∗6/TONE or #7 to move the cursor over the
incorrect digit, then enter the correct number.
±ý
4.Press CH/SEL to store the area code, then press END or return the handset to the base or cradle to clear the display.
6'.'2*10'"12'4#6+10
/#-+0)"#0&"4'%'+8+0)"%#..5
1.To make a call, lift the handset and press TALK/ FLASH. 9edd[Yj_d], then JWba and the current volume setting (see “Setting the Handset Volume” on Page 15) appear on the handset.
If you set the ringer to off, 2H_d][hýE<<4 appears under the volume setting. The base’s CHARGE LED lights.
2.Dial the number. The number appears on the handset as you dial, then the call’s elapsed time appears.
You can also dial the number before you press TALK/FLASH. If you make a mistake, repeatedly press TRSF/DEL to erase the wrong entry, then enter the correct number. Hold down TRSF/DEL to delete the entire number.
When you receive a call, ?dYec_d]ý9Wbbýappears. Lift the handset from the base or cradle and press TALK/FLASH. If auto talk is on, just lift the handset from the base or cradle. If the handset is away from the base or cradle, press TALK/FLASH or any
14
