11.Slots and openings in the telephone’s cabinet and the back or bottom are provided for ventilation. To protect the telephone from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a
12.This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your local power company.
13.Do not allow anything to rest on the power cord. Do not locate this product where the cord will be stepped on.
14.Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
15.Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.
16.To reduce the risk of electric shock, do not disassemble this product. Take it to a qualified serviceman when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the product is subsequently used.
17.Unplug this product from the wall outlet and refer servicing to qualified services personnel under the following conditions:
•When the power cord plug is damaged or frayed.
•If liquid has been spilled into the product.
%106'065
(continued)
Using Speed Dial | 22 |
Deleting a Number in |
|
Memory | 22 |
Caller ID Operation | 22 |
Reviewing Caller ID |
|
Records | 23 |
Caller ID Messages | 24 |
Adding/Deleting the |
|
Area Code | 24 |
Dialing Numbers from a Caller | |
ID Record | 24 |
Storing a Caller ID Record in |
|
Memory | 25 |
Deleting Caller ID |
|
Records | 25 |
Answering System |
|
Operation | 26 |
Using the Menu Button | 26 |
Setting the Day/Time | 26 |
Setting the Number |
|
of Rings | 27 |
Setting the Record Time | 28 |
Setting the Message |
|
Alert Tone | 28 |
Turning the Message Alert |
|
Tone Off | 29 |
Selecting the Outgoing |
|
Message | 29 |
Recording/Deleting an |
|
Outgoing Message | 29 |
Setting the System to Answer | |
Calls | 30 |
Screening Calls | 30 |
Recording Incoming |
|
Messages | 30 |
Recording a Memo | 31 |
Recording a |
|
Conversation | 31 |
Playing Messages | 32 |
Adjusting the Volume | 32 |
Deleting Messages | 33 |
Remote Operation | 33 |
Setting the Security |
|
Code | 33 |
Using the | 34 |
Using Remote |
|
Commands | 34 |
Remote Commands | 36 |
Troubleshooting | 36 |
Care | 38 |
FCC Statement | 38 |
The FCC Wants You |
|
to Know | 38 |
Lightning | 39 |
Important Safety Instructions
3