DC IN 9V | TEL LINE |
|
Installation
DC IN 9V
5.Plug the adapter into a standard AC outlet.
6.Lift the base’s antenna to a vertical position.
1P"C"9CNN"2NCVG"QT"9CNN
To mount the phone directly on a wall, you need two screws (not supplied) with heads that fit into the keyhole slots on the base. Drill two holes 315/16 inches apart. Thread a screw into each hole, leaving the heads extended about 1/8 inch.
1.Plug one end of the supplied modular cord (short for a wall plate, long for direct wall mounting) into the TEL LINE jack on the base’s back.
2.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack.
3.Route the adapter and modular cords through the base’s grooves.
4.For a wall plate, plug the modular cord’s other end into the wall plate jack, then align the base’s keyhole slots with the wall plate studs and slide the base downward to secure it.
For direct wall mounting, align the base’s keyhole slots with the mounting screws and slide the base downward to secure it.
5.Plug the adapter into a standard AC outlet.
6.Lift the base’s antenna to a vertical position.
+056#..+0)"6*'"%*#4)+0)" %4#&.'
1.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the charger.
2.Route the cord through the strain relief slot and plug the adapter into a standard AC outlet.
8
