+056#..#6+10

/1706+0)"6*'"2*10'

You can place the phone on a desk or table, mount it on a standard wall plate, or directly on a wall. Choose a location that is:

near an AC outlet

near a modular telephone line jack

out of the way of normal activities

away from electrical machinery, electrical appliances, metal walls or filing cabinets, wireless intercoms, alarms, and room monitors

away from other cordless phones

You can try different locations to see which provides the best performance. .#

Your telephone connects directly to a modular telephone line jack. If your telephone wiring does not have a modular jack, you can update the wiring yourself using jacks and adapters (available at your local RadioShack store or online at RadioShack.com), or have the telephone company update the wiring for you. You must use compatible modular jacks that are compliant with Part 68 of FCC Rules. The USOC number of the jack to be installed is RJ11C (RJ11W for a wall plate).

1P"C"&GUM"6QR

1.Plug one end of the supplied long modular cord into the TEL LINE jack on the base’s back.

2.Plug the modular cord’s other end into a modular telephone line jack.

3.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back.

4.Route the adapter’s cord through the strain relief slot on the base’s bottom.

."%#76+10".

 

You must use a

 

! Class 2 power

 

source that

 

supplies 9V DC and

 

delivers at least 350 mA.

 

Its center tip must be set

 

to positive and its plug

 

must fit the phone's DC

 

IN 9V jack. The supplied

 

adapter meets these

 

specifications. Using an

 

adapter that does not

Installation

meet these

 

specifications could

 

damage the phone or

 

the adapter.

 

Always connect the AC adapter to the phone before you connect it to AC power. When you finish, disconnect the adapter from AC power before you disconnect it from the phone.

DC IN 9V

TEL LINE

7

Page 7
Image 7
Radio Shack 43-3820 owner manual +056#..#6+10, 1PC&GUM6QR, 1706+06*2*10