message. Each incoming message can be up to one or four minutes long, depending on how you set the recording time (see “Setting the Record Time” on Page 28). The maximum recording capacity is about 16 minutes (or 59 messages).
The system stops recording and resets to answer the next call when:
•The caller hangs up.
•The maximum message length is reached.
•The system detects a busy signal or more than seven seconds of silence.
•You pick up the handset or any phone on the same phone line. ±ý
4'%14&+0)"#"/'/1
A memo is a message you can record for yourself or others. The system stores memos as incoming messages (see “Playing Messages”).
Hold down MEMO until the system announces “Record memo message” and beeps. Speak your message. #ý# flashes.
When you finish the memo, press MEMO or PLAY/ STOP. ±ý
4'%14&+0)"#"%108'45#6+10
The system lets you record both sides of a telephone conversation when you are talking with the handset. #
To start recording a phone conversation, press MEMO on the base until the answering system beeps and ## appears. As it records the conversation, the system beeps to indicate the conversation is being recorded. To stop recording, press PLAY/STOP or MEMO. The system stores a recorded conversation as a message (see “Playing Messages”).
±"016'"±"
•The maximum length for recording a memo is ten minutes.
•The system cannot record a memo less than two seconds long.
•When you try to record a memo and the TAD’s
message memory is full, <Býappears and the system announces “No remaining time”.
#"+/2146#06"#
Every state has different regulations governing the recording of conversations over the telephone. Be sure to check your local, state and federal laws before using this product to record any telephone conversation in order to determine that your use is in compliance with such laws or guidelines.
Answering System Operation
31
