Telephone Operation
°"*+06"°"
To select the desired letter, refer to the letters on the number keys. Press once for the first uppercase letter, twice for the second letter, and so on. To enter a lowercase letter, press four or five times for the first lowercase letter, five or six times for the second letter, and so on.
For example, to enter John: press 5 once; upper case @ appears. Then press 6 six times; lower case e appears. Press 4 five times; lower case ^ appears. Finally, press 6 five times; lower case d appears.
1.Lift the handset.
2.Hold down MEM until C[cehoýIjeh[ and a list of memory location numbers appear.
3.Select a memory location
4.Press CH/SEL. Ijeh[ýDWc[ appears. If you do not want to enter a name, skip to Step 6.
5.To enter a name, use the number keys.
To enter two letters from the same key in a row, press #/7 to move the cursor to the next position. For example to enter AB, press 2 so 7 appears. Then press #/7. The cursor moves to the next position. Press 2 twice so 8 appears.
°
To enter a space, press #/7 twice without entering any character.
To enter a number, repeatedly press the corresponding number key until the number appears.
To enter a special character, use 0. Each time you press 0, the following characters appear in this order:
∗çý#ý&ýâýá (space) &
If you make a mistake, use ∗6/TONE or #7 to move the cursor over the error, then enter the correct character, or press TRSF/DEL to delete a character. Hold down TRSF/DEL to delete all characters.
6.Press CH/SEL. Ijeh[ýDkcX[hýappears.
7.Enter the phone number and any tone or pause entries (see “Using Tone Services on a Pulse
18
