3.5.12.1Press ” Up ” or “ Down ” to choose CLEAR HDD setup.
3.5.12.2Press ” ENTER ” to confirm CLEAR HDD setup.
3.5.12.3Press ” Up ” or “ Down ” to choose CLEAR HDD setup YES or NO. YES: Confirm to clear HDD, and screen will show followings.
ALL DATA IN HDD WILL BE CLEARED ARE YOU SURE? (◄ : NO ► : YES )
Press“ ►” to clear HDD
NO: Confirm not to clear HDD.
3.5.12.4Press ” MENU ” to exit and confirm current operation.
3.5.12.5Press ” MENU ” again to exit and close SYSTEM setup mode.
3.5.13SYSTEM RESET setup
This device allows user to reset the system.
3.5.13.1Press ” Up ” or “ Down ” to choose SYSTEM RESET setup.
3.5.13.2Press ” ENTER” to confirm SYSTEM RESET setup.
3.5.13.3Press ” ” Up ” or “ Down ” to choose SYSTEM RESET Yes or No YES: To confirm System Reset (load default system reset)
NO: Confirm not to System Reset
3.5.13.4Press ” MENU ” to exit and confirm current operation.
3.5.13.5Press ” MENU ” again to exit and close SYSTEM setup mode.
3.5.14REMOTE MODE setup
This device allows user to set the remote mode.
3.5.14.1Press ” Up ” or “ Down ” to choose REMOTE MODE setup
3.5.14.2Press ” ENTER ” to confirm REMOTE MODE setup
3.5.14.3Press ” Up ” or “ Down ” to choose Interface for REMOTE MODE setup
3.5.14.4Press ” MENU ” to exit and confirm current operation.
3.5.14.5Press ” MENU ” again to exit and close SYSTEM setup mode.
3.5.15Remote protocol Transmitting Baud Rate setup
This device allows user to set the remote protocol transmitting baud rate.
3.5.15.1Press ” Up ” or “ Down ” to choose Baud Rate setup.
3.5.15.2Press ” ENTER ” to confirm
18
