Other Information
Digital Still Camera Problems
Although SNAPSHOT is pressed, the snapshot isn’t stored in the
When the remaining picture number icon blinks 0, you must delete some pictures before you can store new ones (see page 69).
It isn’t possible to shoot in succession.
It takes approximately 2 seconds to store a snapshot in memory. You’ll have to wait until the snapshot is stored before taking another picture.
Although ALL is selected in the DELETE menu , all snapshots can’t be deleted.
The Protecting Images function is in effect for some snapshots. If they are not necessary, cancel the Protecting Images function, then try deleting all snapshots again (see pages 68- 69).
If images cannot be deleted, even after you have unprotected them, you may need to initialize the memory. This will erase all the images (including protected) (see page 70).
There seems to be a problem with storing images in memory.
Try to delete some of the images, then try to take a few more snapshots. If that doesn’t work, you may need to save any remaining images to a PC and initialize the memory. This will erase all the images (including protected) from memory (see page 70).
Date/Time Insert isn’t performed while shooting a snapshot.
You can’t display the date/time on a snapshot.
Instant Titles aren’t displayed while shooting a snapshot.
You can’t display the Instant Titles on a snapshot.
Some settings can’t be changed in the DSC menu.
You can’t set REC TIME and INT. TIME in the DSC menu.
98 | Chapter 7 |
