RCA RCU1010RF warranty Backlighting

RCU_1010_RF_IB_RevA.qxd 9/24/03 10:31 AM Page 29

5.The Set Format 12 Hr<>24Hr Screen now appears in the LCD. A solid arrow indicates the current setting. Press and release the LCD LEFT or RIGHT ARROW keys to select 12Hr or 24Hr time format. Press and release the LCD OK key.

6.The Set Day Screen now appears with DAY flashing.

7.Press and release or press and hold the LCD UP or DOWN ARROW keys to select the DAY. Press and release the LCD OK key once you have reached the correct day.

8.The HOURS (HH) digits will now be flashing. Press and release or press and hold the LCD UP or DOWN ARROW keys to select the hour. Press and release the LCD OK key once you have reached the correct hour.

Note: To adjust the AM/PM designation, repeatedly scroll through the hour settings.

9.The MINUTES (MM) digits now flash. Press and release or press and hold the LCD UP or DOWN ARROW keys to select the minutes. Press and release the LCD OK key once you have reached the correct minute setting.

10.Press and release the LCD OK key on the Confirm to Save? Screen to confirm and save.

11.Upon completion of setting the day, time and hour format, the Set More Options? Screen appears. The Day and Time setting is now complete. To exit the Setup Mode, press and release the LCD EXIT key, followed by the LCD OK key on the Exit Setup Screen.

Backlighting

Backlight illumination is generated by an Electroluminescent (EL) panel that gives a blue light, which lets you see the touchscreen and the keys in the dark. Backlight illumination is only activated when you press and release the BACKLIGHT key on the rubber keypad. Pressing the BACKLIGHT key will also activate the LCD touchscreen display. After you press and release the BACKLIGHT key, the light remains on for the power-on default of 10 seconds (or the length of time previously programmed) if no keys are pressed.

If another key is pressed after the BACKLIGHT key, the illumination continues for another 10 seconds (or the length of time previously programmed) after the key is released. Once the Backlight time has expired, the Backlight does not re-activate until the BACKLIGHT key is pressed again. If the Backlight illumination is on, and the BACKLIGHT key is pressed again, the Backlight turns off.

To change the duration of the Backlight On Time, follow these steps:

1.Press and hold the SETUP key on the rubber keypad for

2-3 seconds until the LED indicator light remains on and the touchscreen shows the Code Setup Mode? Screen.

2.Release the SETUP key.

3.Press and release the SETUP key repeatedly until the Set More Options? Screen appears. Press and release the LCD OK key.

Backlighting (continued on next page)

29