RCA RCU1010RF warranty Clear All Stored Learned Commands Under a Mode, Master Clear

RCU_1010_RF_IB_RevA.qxd 9/24/03 10:30 AM Page 19

Clear All Stored Learned Commands Under a Mode

Clearing all stored Learned commands under a specific mode allows you to continuously update your remote with the latest commands.

Note: If no commands have been learned, this option is not shown in the Setup Mode. Upon deletion of Learned commands, all previously Learned keys under that component mode return to their preset code functions.

To clear all Learned commands under one mode (e.g., TV, VCR,

DVD, PVR/DVR, etc.), follow these steps:

1.Press and hold the SETUP key on the rubber keypad for

2-3 seconds until the LED indicator light remains on and the touchscreen shows the Code Setup Mode? Screen.

2.Release the SETUP key.

3.Press and release the SETUP key repeatedly until the Delete IR Mode? Screen appears.

4.Press and release the desired component key for the Learned commands you want the RCU1010RF to clear (TV, VCR, SAT,

PVR/DVR, AUX, etc.).

Note: Only the components that have previously Learned commands are shown on the LCD touchscreen.

5.The Confirm to Delete? Screen is displayed. Press and release the OK key on the LCD touchscreen. The display shows the Deleting Wait Screen. If there are no other component modes with Learned commands, the Learn IR Mode? Screen appears. If there are other component modes with Learned commands, the Delete IR Mode? Screen is displayed.

6.All Learned commands that were previously stored under that mode are now cleared. To exit the Setup Mode, press and release the LCD EXIT key, followed by the LCD OK key on the Exit Setup Screen.

Master Clear

This feature allows you to simultaneously delete all Learned commands. Clearing all stored Learned commands is recommended before first-time Learning.

Note: If no commands have been learned, this option is not shown in the Setup Mode.

To clear all Learned commands, follow these steps:

1.Press and hold the SETUP key on the rubber keypad for

2-3 seconds until the LED indicator light remains on and the touchscreen shows the Code Setup Mode? Screen.

2.Release the SETUP key.

3.Press and release the SETUP key repeatedly until the Delete IR All? Screen appears.

4.Press and release the LCD OK key.

Note: If, at this point, you wish to abort the Master Clear operation, press and release the LCD EXIT key.

5.The Confirm to Delete? Screen is displayed. Press and release the LCD OK key. The LCD touchscreen displays the Deleting Wait Screen, followed by the Learn IR Mode? Screen.

6.All Learned commands are now cleared for all component modes.

7.To exit the Setup Mode, press and release the LCD EXIT key,

followed by the LCD OK key on the Exit Setup Screen. 19