Regency C34-NG2, C34-LP2 installation manual Installation, Alternate Horizontal Termination Caps

INSTALLATION

You will require the following Dura-Vent vent- ing components with your new CLASSIC Di- rect Vent Freestanding Gas Stove. Please review your product to make sure you have everything you need. In the event that you are missing any part, contact your dealer.

Note: These are the minimum compo- nents required. Other parts may be required for your particular in- stallation. See page 11 for a vent- ing components list.

If installing termination on a siding covered wall, a vinyl siding standoff or furring strips can be used in order to ensure that the termination is not recessed into siding.

The vinyl siding standoff is required for walls with vinyl siding.

Dura-Vent Basic

Horizontal Kit # 970

1 90o Elbow

1Wall Thimble Cover

1Horiz. Sq. Term. Cap

Minimum components for a Horizontal Installation using Dura-Vent Compo- nents:

A)Dura-Vent Horizontal Termination Kit #971

B)Wall Thimble #942 (required for combusti- ble walls) (Canada Only)

Minimum components for a Vertical Termination using Dura-Vent Compo- nents:

D)Vertical Termination Kit # 978 See page 11 for pipe lengths).

Alternate Horizontal

Termination Caps

Alternate Snorkel

Termination Cap

Part# 982 (14")

Part# 981 (36")

Alternate Horizontal

Riser Vent Terminal

Part# 640-530/P

The Regency AstroCapTM is certified for installations using FPI venting systems as well as Simpson Dura-Vent® and Direct Vent GS. RegencyTM, and Regency AstroCapTM are the proprietary trademarks of FPI Fireplace Products International Ltd.

Dura-Vent® and Direct Vent GS are registered and/or proprietary trademarks of Simpson Dura-Vent Co. Inc.

18 Regency CLASSIC C34-2 Direct Vent Freestanding Gas Heater