MAINTENANCE

GOLD-PLATED DOORS

The 24 carat gold plated finish on the door requires little maintenance, and need only be cleaned with a damp cloth. DO NOT use abrasive materials or chemical cleaners, as they may harm the finish and void the warranty.

Clean any fingerprints off before turning the unit on.

To remove valve from valve assembly, continue.

11) Remove two (2) thermopile wires.

12) Remove thermocouple with a 9 mm (metric)

wrench.

13) Remove pilot nut with an 11 mm wrench.

14) Remove valve to orifice nut with a 13/16"

GLASS GASKET

Diagram 1

wrench.

15) Remove inlet pipe with pipe wrench. Note

o

If the front glass requires replacement use a front glass gasket (Part # 936-243).

GLASS

REPLACEMENT

Your CLASSIC stove is supplied with high temperature, 5 mm Neoceram ceramic glass that will withstand the highest heat that your unit will produce. In the event that you break your glass by impact, purchase your replace- ment glass from an authorized Regency dealer only, and follow our step-by-step instructions for replacement.

orientation of 90 elbow.

16) Remove two (2) phillips head M5 screws on

each side of the valve.

17) Remove valve and remove gas out 90o

brass fitting. Note orientation of fitting.

See diagram on page 7 for more detail.

INSTALLING VALVE

ASSEMBLY

1) To install a new valve assembly, reverse

instructions for removing valve . See

assembly steps 1-10.

REMOVING VALVE

ASSEMBLY

1)Shut off gas supply.

2)If optional fan is installed, disconnect pow- er source to stove.

3)Remove access panel.

a)Front panel on pedestal model. See diagram 1.

b)Panel from bottom of leg shield. See diagram 2.

Note: Access panel only has to be loos- ened to be taken out.

4)Remove front cover with piezo igniter by removing two (2) sheet metal screws.

Diagram 2

6)Disconnect gas line to stove.

7)Disconnect 3/8" NPT pipe from 90o elbow on valve.

8)Disconnect the two (2) switch wires from valve.

9)Remove orifice.

10)Loosen four (4) phillips head M5 valve mounting screws from underside of fire- box. Drop valve assembly down.

2)

Check for leaks and manifold pressure. See

 

Gas Pressure Test instructions.

3)

To reinstall valve, reverse instructions for

 

removing valve assembly, steps 11-17.

5)Disconnect piezo wire.

Regency CLASSIC C34-2 Direct Vent Freestanding Gas Heater

31

Page 31
Image 31
Regency C34-LP2 GOLD-PLATED Doors, Glass Gasket, Glass Replacement, Installing Valve Assembly, Removing Valve Assembly

C34-LP2, C34-NG2 specifications

The Regency C34-LP2 and C34-NG2 are two exceptional offerings in the world of gas fireplaces, designed to bring both warmth and style to modern living spaces. These units are perfect for homeowners who appreciate the ambiance of a traditional fireplace but desire the convenience and efficiency of gas heating.

Starting with the design, both the C34-LP2 and C34-NG2 feature a sleek and contemporary aesthetic, easily integrating into various interior styles. The clean lines and large viewing area provide an unobstructed view of the flames, creating a focal point in any room. The glass front complements the modern decor while emphasizing the natural flicker of firelight.

One of the standout features of the C34 series is the dual burner system, which allows for enhanced flame control and efficiency. The design offers an impressive flame pattern that can be adjusted to suit the user's preference, whether they seek a cozy, intimate setting or a more robust fire experience. This versatility is especially appealing for entertaining guests or creating a romantic atmosphere at home.

Technologically, both models are equipped with advanced features to optimize performance. The electronic ignition system ensures reliable lighting, while the precision flame adjustment allows users to easily manipulate heat levels. This adaptability can lead to significant energy savings, making the C34 series not only environmentally conscious but also cost-effective.

In terms of technical specifications, the C34-LP2 is designed for liquid propane, while the C34-NG2 runs on natural gas, providing flexibility depending on the homeowner's fuel availability. Both models possess impressive heating capabilities, with an output sufficient to warm larger spaces, making them ideal for living rooms, dining areas, or open-concept homes.

Safety is also a priority with the C34 series. Equipped with a safety shutoff system and a glass front that remains cool to the touch, these units are designed to provide peace of mind for families. The option for a remote control adds an additional layer of convenience, allowing users to adjust settings from across the room.

Overall, the Regency C34-LP2 and C34-NG2 unite modern innovation with traditional comfort. With their stunning design, advanced technology, and excellent heating efficiency, these gas fireplaces are a valuable addition to any home, enhancing both aesthetic and functional appeal.