MAINTENANCE
PLATED FINISHES | GLASS CLEANING | CHIMNEY CLEANING |
The optional plated fi nishes on the louvers and surrounds requires little maintenance and needs only to be cleaned with a damp cloth. DO NOT use abrasive materials or chemical cleaners, as they may harm the fi nish and void the warranty. Keep doors and louvers off during construction to avoid damage.
Only clean your glass window when it is cool. Your local retailer can supply you with a recommended glass cleaner if plain water and a soft cloth does not remove all deposits. Do not use oven cleaner on the glass as it will etch the glass.
Do not use any type of abrasive cleaner to clean glass.
Do not permit any creosote or soot
a. | Remove the fi rst secondary air tube and |
| baffl es. |
b. | Removetheterminationcapbyremoving |
| the screws and lifting. |
DOOR GASKET
If the door gasket requires replacement, you must use 5/8" (16mm) diameter oval, medium density material, 34"(864mm)longforeachside. A proper high temperature gasket adhesive is required. Contact your dealer for the Regency Gasket Repair Kit.
DOOR HINGES
Grease door hinges with high temperature grease regularly for smooth operation and to avoid squeaks.
GLASS REMOVAL /
REPLACEMENT
Allow the stove to cool before removing or replacing glass. Remove the door from the
fireplace and remove the glass retainer. Use caution when removing broken glass to avoid injury. When placing the replacement glass in the door, make sure that the glass gasketing will properly seal your unit. Replace the retainer and tighten securely, but do not wrench down on the glass as this may cause breakage. Do not substitute materials. If your glass door breaks, do not use your unit until it has been replaced.
c. Make sure fi replace doors are shut to | |
| prevent soot and dirt from entering the |
| loom. |
d. | Clean chimney with either nylon or steel |
| brush. |
e. | Replace chimney cap. |
f. | |
| tubes. |
MAINTENANCE
FPI FP90 Wood Fireplace | 35 |
