Getting started

Getting started

Before you make any connections, switch off all the appliances involved, including the plasma display.

Unpacking, viewing, locating and installing

Unpacking

. Place the box upright with its underside on a solid base. The direction of the arrowheads on the long side of the box indicates the top of the box.

. Remove the packaging tape from the opening edge and open the box’s flap outwards.

. Remove the two top polystyrene packing corners and take the accessories box out of the packing. This is located on the side at the rear of the display.

Polystyrene corner

Polystyrene corner

Viewing position

DAlthough the plasma TV has a large display angle, its best performance is achieved when viewed directly from a central front position. Align the display with the most frequent viewing position.

Location

DLight reflection

Avoid positioning the display opposite windows or other light sources.

DAccess to the mains input

The mains input and mains switch should be easily accessible at all times.

DAir supply

Leave a space at the side and to the rear of at least 10 cm from any furniture. The space above the unit should be at least 30 cm from any furniture or the ceiling.

With the wall mounting the space must above at least 80 cm to any furniture or to the ceiling. Laterally and down you should keep to a least space of 10 cm.

DAmbient temperature

To ensure safe, reliable operation the ambient temperature must be between 5 °C and 35 °C.

8

ENGLISH

Page 36
Image 36
Revox M642 HD manual Getting started, Unpacking, viewing, locating and installing, Viewing position, Location