5.1 Decoder Module 3 | Re:source |
Amplifier Setup
Using the Setup menu, you can adapt your loudspeakers to the optimum acoustics with the M51.
This menu is called by pressing and holding the Setup key for some 2 seconds and then pressing the Amplifier key in the display that follows.
Now you are in the 5.1 Decoder Setup menu.
Speaker configuration
The first page in the Amplifier setup covers the configuration of home cinema speakers.
Here, you can define which speakers you have connected and whether these are large speakers with the full frequency range or smaller speakers with limited bass reproduction.
There are three options for each speaker type that can be selected by repeated pressing of the corresponding softkey:
16
