Rhino Mounts DB150 manual Operation, OPS-B- 0023C

(SG-20)

OPERATION

OPERATION

Never Leave the mower unattended while the head is in the raised position. The mower could fall causing serious injury to anyone who might inadvertently be under the mower. (SBM-4)

BOOM ARM ASSEMBLY

•Inspect condition of arm section weldment

•Ensure all pins are in place.

•Ensure all bolts and screws are properly installed.

•Ensure each hydraulic cylinder is installed and retained correctly. Ensure the proper size pins are used to retain the cylinders in place and are secured properly. OPS-B- 0022_C

Never attempt to lubricate, adjust, or remove material from the Implement while it is in motion or while tractor engine is running.

HYDRAULIC LINE INSPECTION

•Check for hydraulic leaks along hoses, cylinders and fittings. IMPORTANT: DO NOT use your hands to check for oil leaks. Use a piece of heavy paper or cardboard to check for hydraulic oil leaks.

•Inspect the condition of the valve weldment.

•Ensure fitting is properly connected

•Inspect condition of hydraulic motor.

OPS-B- 0023_C

DB150 07/11 Operation Section 4-16

© 2011 Alamo Group Inc.