Rhino Mounts DB150 manual Tractor Preparation, Mainframe Attachment, Assembly

ASSEMBLY

TRACTOR PREPARATION

Add front end weights as required to maintain enough weight on front wheels for safe steering.

Failure to add the required front end weight can cause tractor to rear up which can cause equipment damage and bodily injury.

To prevent damage to the Hydraulic Pump, do not attempt to start tractor before installing the hydraulic systems and filling the system with Universal Tractor Hydraulic oil as specified.

MAINFRAME ATTACHMENT

With a forklift or hoist raise the Mainframe until it lines-up with the 3-point hitch. Figure Asm-B-0001.Attach the Mainframe to the 3-point hitch by using a standard Cat. II pin (Figure Asm-0003) or a optional Cat. II & III pin (Figure Asm-B-0004-0005) and a Retaining Pin. Attach the tractor Top Link to the Mainframe with bolt and locknut. Figure Asm-B-0006.

DB150 07/11 Assembly Section 3-3

© 2011 Alamo Group Inc.

ASSEMBLY