Rhino Mounts DB150 manual Setting Boom Mower Height

OPERATION

OPERATION

6.1 Setting Boom Mower Height

1.Park the tractor and boom mower on level ground.

2.Shut down the tractor and remove the key.

3.Level the boom mower from front to rear by extending or retracting the 3-point top link.

4.Level the mower side to side by manipulating one lower lift arm length. On most tractors, at least one of the lift arms is designed to allow for manipulation of its length. Shortening or extending will allow for deck leveling from side to side.

5.Securely block up the mower at this height.

NOTE: Install optional check chains when there is a problem with the hydraulic 3-Point lift maintaining a set height or when a constant pre-adjusted cut height is required. See Check Chains in the Assembly Section for this accessory.

DB150 07/11 Operation Section 4-10

© 2011 Alamo Group Inc.