Rhino Mounts DB150 manual Features, Direction

INTRODUCTION

Your DB150 Boom is designed for heavy-duty cutting in limited access areas such as highway, park, and rural roadsides, overhead growth, ditches, levees, and other such grass and limb control uses in generally hard-to- reach areas. Your Maverick Boom can be equipped with a variety of cutting heads designed for specific cutting needs.

Features

Powerful – Hydraulically driven 60” rotary cutting head

Operating Range – 85 degrees up and 90 degrees down allowing the operator to mow in many different circumstances that are impossible with ordinary mowers

Standard Equipment – Counterweight is provided with a 60 gallon hydraulic reservoir tank Easy to Mount – CAT II/III quick hitch

Efficient – Hydraulic oil tank permits the system to run cooler in rough mowing conditions Durable Construction – Top deck made of 10 gauge steel

Versatility – Mower has a tilt angle of 85 degrees up through 70 degrees down and a max reach of 158”” from the center line of the tractor

Cutting Capacity – 1” diameter grass, weeds and brush

Safe Operation – Front and rear double chain guards, no dangerous moving parts above the deck, i.e. drivelines, belts, pulleys or u-joints

Tractor Requirement – 60 PTO HP with ample front-end counterweight

Warranty – One year parts and labor. Non-governmental users subject to a modified policy. Only genuine Rhino OEM replacement parts may be used for warranty replacement.

DIRECTION

Throughout this Manual front and rear, left and right are determined by the normal direction of travel, the same as driving an automobile.

DB150 07/11 Introduction Section 4-3

© 2011 Alamo Group Inc.

INTRODUCTION