Ricoh 161F, 161SPF ❖SUB Code, ❖SEP Code, ❖Fax number, ❖International TX Mode

Fax Destination

Fax Destination

Register a fax destination so you do not need to enter fax numbers each time, and can send documents that have been scanned in using the fax function.

•It is easy to select the fax destination if you register "Name" for the fax desti- nation.

•You can register fax destinations by selecting them from redial function.

•Registered Fax numbers can be used as sender's Fax numbers.

There are two types of fax destination, as shown below:

•Fax Number

Select this to send the fax over the telephone network.

•IP-Fax Destination

Select this to send the fax to a machine on a TCP/IP network. You cannot send the fax to a machine on another network if that network is behind a firewall.

You can program the following items in a fax destination:

❖Fax number

Registers the destination's fax number. You can enter a fax number using up to 128 digits. You must include every digit in the number.

❖SUB Code

Registering a SUB Code allows you to use Confidential Transmission to send
	7
messages to the other fax machines which support a similar function called

"SUB Code". See "Setting SUB Codes for Transmission", Facsimile Reference.

❖SEP Code

Registering a SEP Code allows you to use Polling Reception to receive faxes from the other fax machines which support Polling Reception. See "Setting SEP Codes for Reception", Facsimile Reference.

❖International TX Mode

When setting the International TX mode to [On], the machine transmits more carefully by lowering transmission speed. However, communication times increase.

163