Troubleshooting

 

 

 

 

 

 

Possible Cause

Solutions

 

 

 

 

 

 

WhenusingwirelessLAN,is

Check access point settings when in infrastructure mode. Depending

 

 

the access point correctly set?

on the access point, client access may be limited by MAC address.

 

 

 

Also, check there are no problems in transmission between access

 

 

 

point and wired clients, and between access point and wireless clients.

 

 

 

 

 

 

When using wireless LAN,

Confirm the orange LED is lit, and the green LED is lit or blinks

 

 

is the LED on the wireless

during transmission.

 

 

LAN card lit or blinking?

 

 

 

 

 

 

 

Is the wireless LAN being

Turn the main power off and back on. See “Turning On the Pow-

 

 

used in ad hoc mode?

er”, General Settings Guide.

 

 

 

Otherwise, configure [Network] in [Interface Settings] in [System Set-

 

 

 

tings]. See “Setting Up the Machine on a Network”, Network Guide.

 

 

 

 

 

 

Did you change the option

When using the RPCS printer driver on Windows 2000 and con-

 

 

settings on the machine?

necting with IEEE 1394, an error may occur if you change the op-

 

 

 

tion settings on the machine. In this case, follow the procedure

 

 

 

below:

 

 

 

A Unplug the IEEE 1394 interface cables connected to the computer.

 

 

 

B Run the utility tool for the IEEE 1394 interface board, which is

 

 

 

stored in the following path on the CD-ROM “Printer Drivers

 

 

 

and Utilities”.

 

 

 

\UTILITY\1394\

 

 

 

Reference

 

 

 

For more information about using the utility tool for IEEE

 

 

 

1394, see the README file in the same directory on the CD-

 

 

 

ROM.

 

 

 

C Restart the computer.

 

 

 

 

 

 

 

D Connect the computer to the machine using the IEEE 1394 in-

8

 

terface cables.

 

 

 

 

 

 

Is the weekly timer set?

The printer may not be able to print because of the weekly timer

 

 

 

setting. Check the setting. For details, see “User Tools (System Set-

 

 

 

tings)”, General Settings Guide.

 

 

 

 

 

 

Print cannot be performed

The login user name, password, or driver encryption key entered

 

 

from the printer driver.

is incorrect.

 

 

 

A high level of encryption was set using the Extended Security

 

 

 

function.

 

 

 

• Check your login user name, password, and driver encryption key.

 

 

 

• For information about the Extended Security settings, consult

 

 

 

an administrator.

 

 

 

 

 

 

143