Preparing the Machine

J Click [Finish].

If the printer driver has already been installed, plug and play is enabled, and the icon of the printer connected to the "USB001" port is added to the [Printers] window.

K Click [Next>].

2L Click [Search for the best driver for your device. {Recommended}.], and then click [Next>].

M Select the [Specify a location:], check box, and then click [Browse...]. The [Browse for Folder] dialog box appears.

N Insert the CD-ROM into the CD-ROM drive.

Note

❒When Auto Run starts, click [Exit].

❒To disable Auto Run, press the {Shift} key when inserting the CD-ROM into the drive and keep it pressed until the computer finishes reading from the CD-ROM.

O Specify the location where the source files of the printer driver is stored, and then click [Next>].

If the CD-ROM drive is D, the source files of the printer driver are stored in the following location:

•RPCS

D:\DRIVERS\RPCS\WIN9X_ME\(Language)\DISK1

•PCL 5c

D:\DRIVERS\PCL5C\WIN9X_ME\(Language)\DISK1

•PCL 6

D:\DRIVERS\PCL6\WIN9X_ME\(Language)\DISK1

•PostScript 3

D:\DRIVERS\PS3\WIN9X_ME\(Language)\DISK1

P Check the location, and then click [Next].

Add Printer Wizard starts.

Q Click [Finish].

Installation is complete. If installation is successful, the icon of the printer connected to the "USB001" port is added to the [Printers] window.

Note

❒The number after "USB" varies depending on the number of printers connected.

❒It is not necessary to reinstall USB Printing Support when connecting a dif- ferent machine via USB interface when USB Printing Support is installed.

❒After installing USB Printing Support, if the printer driver is not installed, follow the plug-and-play instructions of the printer.

44