Using as the NetWare Print Server/Remote Printer

H Click [Port:], and then click [Add].

I Click [Network Printer], and then click [OK].

J Double-click the name of the NetWare file server on the network tree.

The created queue is displayed.

K Select the print queue, and then click [OK].

2

L Check that the port of the selected printer is displayed in [Port:]. M Click [Finish].

The printer driver installation starts.

N Click [Finish] in the [Component selection] dialog box.

O Click [Finish] in the [Introduction complete] dialog box.

P In the [Printers] window, open the printer properties.

Under Windows XP or Windows Server 2003, open the printer properties from the [Printers and Faxes] window.

Q On the [Printer Settings] tab, clear the [Form Feed] and [Enable Banner] check boxes.

Under Windows 2000/XP, Windows Server 2003, or Windows NT 4.0, click the [NetWare setting] tab.

Do not select these check boxes since they are automatically selected by the printer driver. If you select the check boxes, the printer may not print correctly.

R Click [OK] to close the printer properties dialog box.

Note

The protocol is set to inactive as default. Enable it using Web Image Mon- itor or Telnet

41