Using the SmartDeviceMonitor for Client Port

L Select the printer you want to use, and then click [OK].

Only printers that respond to a broadcast from the computer appear. To use a machine not listed here, click [Specify Address], and then enter the NetBEUI address. The NetBEUI address can be checked with the configuration page. For information about printing a configuration page, see p.113 “Printing the configuration page”. The NetBEUI address appears in the format of “\\RNPxxxx\xxx” on the configuration page. Enter the machine's network

path in the format of “%%Computer name\Share name”. Use “\\” instead of 2 “%%” at the beginning.

M Check that the port of the selected printer is displayed in [Port:]. N Set a user code, if necessary.

This allows a SmartDeviceMonitor for Admin user to display and check statistics about the number of sheets which each user prints. For details, see SmartDeviceMonitor for Admin Help.

Up to 8 numeric characters can be entered. Neither alphabetic characters nor symbols are available.

O Select the [Default Printer] check box to configure the printer as default. P Click [Finish].

The printer driver installation starts.

Q Click [Finish] in the installation completion dialog box.

A message about restarting the computer may appear. Restart the computer to complete installation.

Note

The protocol is set to inactive as default. Enable it using Web Image Mon- itor or Telnet

To stop installation of the selected software, click [Cancel] before installa- tion is complete.

Reference

A message appears if there is a newer version of the printer driver already installed. If there is, you cannot install the printer driver using Auto Run. If you still want to install the printer driver, use [Add Printer]. See p.57 “If a Message Appears during Installation”.

29