Ricoh 3228C, 3235C, 3245C Note, Note, Important, Reference, 1.Extender, 2.Paper guides, [Reverse order print], D Select the paper size, key on the control panel

Setting Paper on the Bypass Tray

B Adjust the paper guides to the paper size.

Important

❒If the paper guides are not flush against the paper, skewing and misfeeds might occur.

C Gently insert paper face up into the bypass tray until the beeper sounds.

AEU011S

1.Extender2.Paper guides

Note

❒The beeper will not sound if it is turned off. Gently insert paper until it stops.

❒Do not stack paper over the lim- it mark, otherwise a skewed im- age or misfeeds might occur.

❒Open out the extender to support

paper sizes larger than A4 L, 81/2"⋅11" L.

❒Fan the paper to get air between the sheets to avoid a multi-sheet feed.

❒When setting an OHP transpar- ency, make sure that its front and back sides are properly po- sitioned.

❒Select paper type when printing onto OHP transparencies or thick paper (over 127.9 g/m2). For de- tails, see p.17 “Setting thick pa- per or OHP transparencies”.

D Select the paper size.

Note

❒You can set paper size using the printer driver. The following procedures are not necessary when setting paper size using the printer driver.

❒The paper size set using the printer driver has priority over that set using the display panel.

❒When the printer driver is not used, make settings using the display panel.

❒Thick paper and OHP transpar- encies are delivered face up on the top of the preceding page; therefore, the prints need to be rearranged into the correct or- der. To avoid this, select [Reverse order print] in the RPCS printer driver settings to deliver the prints in the correct page order.

Reference

For printer driver settings, see the printer driver Help.

For details about setting custom sizes, see p.16 “Setting custom size paper”.

A Press the {User Tools/Counter}key on the control panel.

AEU035S

BPress [System Settings].

1

15