Ricoh Caplio RR30 Connecting the Camera to a Computer, Disconnecting your camera from computer

Chapter 2 / Section 1 Downloading Images to a Computer

Connecting the Camera to a Computer

After installing the software on your computer, connect your camera to it.

Make sure the camera's power is off.

Connect the USB cable to the USB port of your computer.

Open your camera's terminal cover and connect the USB cable to its USB terminal.

In Windows XP, the first time you connect your camera to the computer using a USB cable, the [New Hardware Detected Wizard] screen will appear.

Select [Install from a list of specific location (Advanced)].

Select [Next].

Select [Search for the best driver in these locations.] -[Include this location in the search] and then press the [Browse] button.

Your camera turns on.

Select the folder, where the Caplio RR30 Software is installed, that has the [WIA driver] (For example, C:\Program Files\Caplio RR30\WIA driver) and then select [Next].

The WIA Driver is installed.

Disconnecting your camera from computer

1. Turn your camera off by pressing the power button.

2. Unplug the USB cable.

• When you are downloading images from your camera, the AC Adaptor (sold separately) is recommended.

118