Ricoh Caplio RR30 operation manual Inserting the Date into a Still Image Date Imprint

Chapter 1 / Section 3 Using Special Features for Improved Photography

Inserting the Date into a Still Image (DATE IMPRINT)

You can stamp the date on the bottom right of your still images. You can choose to display the date in one of two formats, Date (Y/M/D) or Date and Time (Y/M/D/H:M).

To enter the date or date and time, follow the steps below.

Buttons used here

Turn the Mode Dial to (Shooting Mode).

Press the button.

The Shooting menu appears.

Press the buttons to switch between displays as required.

Press the button to select [DATE

IMPRINT] and then press the button.

Press the buttons to select the desired setting.

Press the button.

The Date Imprint settings are completed.

Press the button.

The Shooting Menu closes and is displayed on the bottom right of the screen.

This setting will be used for shooting until you change it.

•If the date and time have not been set, DATE IMPRIMNT cannot be used. First make the date and time settings.

•DATE IMPRINT cannot be used with movies.

•If you wish to imprint Date Stamp when shooting in TEXT MODE (while in Shooting Mode), make the settings as described above.

For how to set date and time, see p.12.

66