Ricoh Caplio RR30 operation manual Switching the Screen Display, „When Shot, „When Playing Back

Chapter 1 / Section 1 Getting Started

Switching the Screen Display

If you press , you can change the screen display mode, such as switching between display/no display of symbols, etc.

„When Shot			Grid Guide	Synchro-Monitor
	Display Symbols
		No Display	Display	Mode

button

In the Synchro-Monitor Mode except with the following operations, the LCD Monitor is turned off (No Display). This is a useful mode to reduce power consumption.

•Half-press the shutter button.

The LCD Monitor is tuned on and you can confirm composition. After you finish shooting with Full-Press, the LCD Monitor will automatically turn off.

•Press the (Quick Review) button.

You can view the photo you just took (see p.71). By pressing the (Quick Review) button again, you can turn the LCD Monitor off.

•Press the button

The LCD Monitor Display is turned on and you can make various settings for shooting (see p.24). By pressing the

button again, you can turn the LCD Monitor off.

•You cannot turn the LCD Monitor Display on/off by pressing (Self-timer), (Flash) or (Macro) buttons.

•Turning the LCD Monitor Display Off conserves battery life. In this case, shoot using just the Viewfinder.

When the No Display or Grid Guide Display is on, symbols will appear only for a few seconds right

after pressing (Self-timer), (Flash) or (Macro) buttons.

For how to display the grid guide, see p.68.

„When Playing Back

Display Symbols No Display

button

18