Ricoh Caplio RR30 operation manual SYNCHRO-MONITOR Mode

							Appendix
Symptom	Cause			Measure			Page
Images do not	The power is not on. Or the LCD			Turn the power on. Or adjust the brightness of			p.11
appear on the LCD	Monitor is dark.			the LCD Monitor.			p.101
Monitor.
	The video cable is connected.			Disconnect the video cable.			p.80
	The screen display status is in			Press the Display button and switch display.			p.18
	[SYNCHRO-MONITOR MODE].
	It is set to [POWER SAVE].			Set [POWER SAVE] to off.			p.96
Although it is set to	The lens is dirty.			Wipe clean with a soft, dry cloth.			—
Auto Focus, it does
	The subject is not in the center of the			Shoot with Focus Lock.			p.32
not focus.	shooting range.
	It is a hard-to-focus subject.			Shoot with Focus Lock or Manual Focus.			p.32
							p.55
The flash does not	The Shooting Mode is set to			Switch the Shooting Mode to		(Still	p.44
fire. Or the flash	(Multi-Shot) or		(Movie).	Image).
cannot recharge.
	The flash is set to		(Flash Off).	Set to Flash Off with the	button.		p.44
	The White Balance is set to			Set the White Balance to Auto mode.			p.49
	something other than Auto mode.
	Batteries are running low.			If using alkaline batteries, replace with a new			p.9
				set.			p.10
				If using rechargeable batteries, recharge or
				use the AC Adaptor.
Even though the	The distance to the subject is			Get closer to your subject and shoot.			p.44
flash fired, the	greater than 2.5 meters in Telephoto
picture is dark.	or greater than 4.5 meters in Wide-
	angle.
The image is too	You are too close to the subject.			Set to Flash Off with the	button.		p.44
bright.
	It is over-exposed.			Use exposure compensation. Cancel			p.47
				Exposure Time.			p.63
	The brightness of the LCD Monitor is			Adjust the brightness of the LCD Monitor.			p.101
	odd.
The image is too	The shot was taken in a dark place			Release the Flash Off with the		button.	p.44
dark.	while set to	(Flash Off).
	It is under-exposed.			Use exposure compensation. Set to Exposure			p.47
				Time.			p.63
	The brightness of the LCD Monitor is			Adjust the brightness of the LCD Monitor.			p.101
	odd.
The image lacks	The picture was shot in conditions			Add a white object to the composition. Or use			p.44
natural color.	that are hard for Auto White Balance			Auto Balance in a setting other than Flash			p.49
	to adjust to.			shooting or Auto Mode.
The date, or	The screen display function is set to			Press the Display button and switch display.			p.18
recording	No Display.
information does not
appear.
The brightness of	You are using it in a dark place or			This is normal.			—
the LCD Monitor	when Auto Focus range and
changes during AF.	surrounding brightness are different.
There is a vertical	This is a phenomenon that occurs			This is normal.			—
smear on the image.	when a bright subject is shot. It is
	called the smear phenomenon.

146