157
Changing Camera Settings
5
To transfer images to your computer using software, change the
[USB CONNECTION] setting depending on the software.
By setting [USB CONNECTION] to [MASS STR] on the SETUP
menu, you can view files in the camera and transfer files from the
camera to your computer using the USB cable without installing the
supplied software or USB driver.
*For Windows 98SE, set [USB CONNE CTION] to [ORIGINAL].
When set to [ORIGINAL], th e max im um si ze f o r a t ran sf era ble SDH C memo ry c ar d is 4 GB.
Caution----------------------------------------- -------------------------------------------------
•Images in the camera canno t be de le te d w hen [U SB C ONN ECTI ON] i s se t to [M ASS
STR].
•Do not format the SD memory card or internal memory from your computer when
connected via mass storage mode. Be sure to format using the camera.
•Be sure to stop the connection before removing the USB cable when connected in
mass storage mode.
•Files will not be properly tr ansferred if the USB cable is removed while transferring
images from an SD memory card in s erted in the camera to your co mputer before
stopping the connection.
Also, transferring to the internal memory is not available with this camera.
Changing the USB Setting (USB CONNECTION)
Software used for transfer [USB CONNECTION] setting
Instead of using software, the comp uter recog nizes the SD
memory card or internal memory of the c am era as a dri ve. MASS STR**Default setting
RICOH Gate La MASS STR *Default setting
/ORIGINAL*
(Either setting can be us ed.)
Auto Document Link ORIGINAL