179
6
Downloading Images to Your Computer
You can download images from the camera to a computer without
having to use software.
1
Change [USB CONNECTION] to [MASS STR] on the
SETUP menu. (GP.157)
2
Make sure that the camera power is off.
3
Connect the accessory USB cable to a USB port of your
computer.
4
Connect the USB cable to the
USB terminal of your camera.
• Your camera turns on.
• Your computer automatically reads a
file necessary for recognizing the
camera as a drive.
• After this preparation, the camera is displa yed as a drive at [My
Computer] (Windows) or Desktop (M acintosh).
5
From the displayed drive,
copy a file to the desired
location.
• The figure at right shows the
folder configuration in the drive.
• When the contents of the internal
memory are displayed, the drive
name is [RICOHDCI].
Caution----------------------------------------- -------------------------------------------------
•Mass storage mode is not available on this camer a if you are using Windo ws 98SE.
Set to [ORIGINAL]. (GP.157)
•Do not turn off the camera or disconnect the USB cable during image transfer.
•If a file with the same name alr eady exists at the destinati on, it is overwritten. If you
do not want the file to be over writt en, re name t he f ile o r trans fer dat a to ano ther f olde r.
Downloading Images Without Using the Caplio Software
Example of the display in
Windows XP
Example of the display in Windows XP