184
6
Downloading Images to Your Computer
Refer to P.164 for Windows.
This camera supports the following Macintosh operating systems.
Mac OS 9.0 to 9.2.2
Mac OS X 10.1.2 to 10.4.8
This function is not available on this camera if you are using Mac
OS 8.6.
1
Set [USB CONNECTION] to [MASS STR] on the SETUP
menu.
2
Make sure that the camera power is off.
3
Connect the accessory USB
cable to a USB port of your
computer.
4
Connect the USB cable to the
USB terminal of your camera.
Your camera turns on.
Your computer automatically reads
the file necessary for recognizing the
camera as a drive.
After this preparation, the camera is
displayed as a drive on the Desktop.
5
From the displayed drive,
copy a file to the desired
location.
The figure below shows the folder
configuration in the drive.
When the contents of the internal
memory are displayed, the drive
name is [RICOHDCI].
For Macintosh

Downloading Images to Your Computer