Basic Procedure for Scanning Files Using TWAIN Scanner
The following table shows the relationship between the original orientation and the Scanner Control dialog box settings:
Placing an Original on the Exposure Glass
Placing Originals | TWAIN Scanner Control Dialog Box Key |
top edge touches top left of exposure glass This orientation is the TWAIN driver's standard setting. Place originals in this orientation normally
top edge touches rear of exposure glass | 4 |
|
Placing an Original in the ADF/ARDF
Original Orientation | TWAIN Scanner Properties Dialog Box Key |
top edge of original placed first
top edge touches rear of ADF/ARDF
Note
❒Originals are normally rectangular (
) or horizontally long (
). However, the table above uses squares to make original orientation easier to under- stand. Even if the actual shape of the original is different, the combination of original orientation and the orientation specified on the scanner driver does not change.
❒For details about the Scanner Control dialog box, see "Basic Procedure for Scanning Files Using TWAIN Scanner".
❒Depending on the settings, originals of different sizes are scanned differ- ently.
Reference
p.91 “Basic Procedure for Scanning Files Using TWAIN Scanner”
93