Using the Network TWAIN Scanner Function

Installing TWAIN Driver from Provided CD-ROM

This section explains how to install the TWAIN driver on a client computer from the supplied “Scanner/PostScript® Drivers and Utilities” CD-ROM.

To use the TWAIN scanner function, you need to install the TWAIN driver on the client computer.

A Start Windows, and then insert the CD-ROM labeled “Scanner/PostScript® Drivers and Utilities” into the CD-ROM drive of the client computer.

The installer is automatically started and the [Scanner/PostScript® Drivers and Utilities] dialog box appears.

B Click [TWAIN Driver].

4C The installer of the TWAIN Driver starts. Follow the instructions.

Note

❒Before you start the installation, check the system requirements for the TWAIN driver. For details about the system requirements, see “Software Supplied on CD-ROM”.

❒You can install the software using the auto-run program. For details about the auto-run program, see “Quick Install”.

❒If the installer does not start automatically, see “Quick Install”.

❒When the installation is complete, a message about restarting the client computer may appear. In this case, restart the client computer.

❒After the installation is complete, a folder with the name of the machine in use is created in [Program] on the [Start] menu. You can display Help from here.

❒Notes on using the network TWAIN scanner are provided in Readme.txt. Be sure to read them before use.

Reference

p.126 “Software Supplied on CD-ROM”

p.126 “Quick Install”

90