Various Scan Settings
Stamp
This section explains the procedure for stamping on originals scanned from the ADF.
Important
❒To enable stamping, you must install the optional Refax stamp cartridge.
A Press [Options].
B Press {U} or {T} to select [Stamp], and then press {OK}.
5
C Select [On], and then press {OK}.
"Programmed" appears, and then the Send Options screen reappears.
D Press {Escape}.
Note
❒Stamping may continue even if scanning is interrupted, depending on the cause of interruption.
❒Replace the stamp cartridge when Stamp begins to fade. For details, see "Replacing the Print Cartridges" and "Replacing the Transmission Stamp Cartridge", in Troubleshooting.
❒[Stamp] appears only if the ADF is installed.
108